Super Clone Omega Seamaster Diver 300M Commander's Watch Ref.212.32.41.20.04.001
$749.00
-
$ USD
-
€ EUR
-
£ GBP
-
$ CAD
-
$ AUD
- Best Qulity Guarantee
- 24/7 Support
- Express Shipping: 9 - 15 days
- Free Returns
Super Clone Omega Seamaster Diver 300M Commander's Watch Ref.212.32.41.20.04.001
$749.00
-
$ USD
-
€ EUR
-
£ GBP
-
$ CAD
-
$ AUD
- Best Qulity Guarantee
- 24/7 Support
- Express Shipping: 9 - 15 days
- Free Returns
Worldwide Shipping 9-15 days
1 Year warranty
Best Quality Guarantee
Blue, red, white, blue, red, white: the stripe repeating along the nylon strap is the first thing the eye reads on this watch, and it is the key to everything sitting above it. Read it as a livery rather than as a strap pattern. A livery is a fixed colour code worn in every part of a thing, and that is what reference 212.32.41.20.04.001 does: the three colours of the strap are the three colours of the watch head. Omega’s name for that code is the Commander’s Watch, and on this 41 mm steel Seamaster Diver 300M the name is the part you can ignore. The colour code is what you actually wear.
Blue, Red and White: The Livery Explained
Blue carries the largest share. The bezel is blue ceramic, a solid ring of colour wrapping the whole dial opening, and blue returns on the dial itself as accent work. The ring holds the same value of blue at every angle, so what frames the white dial is one unbroken block of colour.
White is the field. The dial is white, and a white dial does something no dark dial can do: it pushes every other element forward instead of absorbing it. Nothing recedes on a surface like this.
Red is the smallest quantity on the watch, and that restraint is the whole trick of the scheme. Red appears only as accent, never as a field, which is why it registers as a deliberate mark rather than decoration. Used in the smallest measure against white, it becomes the point the eye lands on first.
The striped nylon then repeats all three in equal bands. That is why this Seamaster reads as a complete object rather than a watch that happens to have a strap fitted: the strap is not an accessory to the colour scheme, it is a third statement of it.
Reading a Dial That Is Mostly White
A mostly white dial changes how you tell the time. On a black Diver 300M the markers and hands are bright shapes on a dark ground, and the eye hunts for light. Here the logic reverses: the dial is the light, and everything functional has to be darker than the surface it sits on to be read at all. That inversion is why a white dial reads so fast in daylight, and why this one feels unlike the dark-dialled divers around it.
It also means the blue and red accents are not merely pretty. On a white ground they are the only interruptions, so they become navigation: the eye goes to the coloured elements first and reads position from them. At 41 mm the white field is modest, so proportionally those accents carry more weight than they would across a wider dial.
White is also the least forgiving dial surface there is. On a dark dial a soft printing edge or a hand that sits a fraction off centre disappears into the background; on white there is nowhere for it to hide, and it shows at arm’s length under ordinary room light.
Nylon Today, Steel Tomorrow
The bracelet material attribute on this card offers nylon or stainless steel, and the choice decides how much of the colour code you end up wearing.
The striped nylon is what you see in the photographs, and it is the version that states the livery three times over. It is a pass-through strap, so the case sits slightly higher on the wrist and the watch turns casual immediately.
The stainless steel bracelet takes the stripe out of the equation entirely. With steel on both sides of the case, blue, red and white survive only in the watch head, and the piece stops announcing a colour code and starts reading as a steel diver with an unusual dial. That is the quieter configuration, and the easier one to wear with a shirt.
An Earlier Co-Axial: Calibre 2500 and the JF Build
This is the part most buyers get wrong, so it is worth being blunt. The 212.32 prefix places this Seamaster in the earlier Co-Axial generation: the genuine watch runs calibre 2500, not the current platform. The 42 mm Diver 300M cards elsewhere in this range are built on the later 8800 generation, and this one sits a millimetre under them at 41 mm. You are choosing an older watch in a slightly smaller case, deliberately, for how it looks.
Our build follows that logic. The superclone movement is a 2500 constructed on a 2824 base, from the JF factory, which is a more conservative engineering route than the VS8800-type builds behind the newer references. A 2824 architecture is the most familiar platform in this market, and that familiarity is the practical argument for it: the people who service these watches know it.
- Genuine calibre: Omega Co-Axial 2500
- Clone movement: 2500 built on a 2824 base, from the JF factory
- Clone power reserve: 42 hours; water resistance 300 m
If the earlier 41 mm case appeals but a white dial does not, the blue-dial 212.30.41.20.03.001 on the same earlier 41 mm case is the conventional dark-dial route through the same generation. For the later 42 mm builds and the rest of the Omega Seamaster clone collection, start from the category page, where the two generations sit side by side.
| Feature | Superclone | AAA grade | A grade |
|---|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±10–15 s/day | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Hybrid Asian 2824/2836/Seagull base with cosmetic plates | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Slight grain; audible rotor in quiet rooms | Grittier; common rotor noise |
| Power reserve | 60–72 h | 40–55 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L with good finishing | 316L basic finishing |
| Crystal | Sapphire, decent AR | Sapphire (some single-AR) or mineral on cheaper lines | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | 30–50 m rated | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Within ~±15–25 g | Noticeably off |
| Feature | Superclone | A grade |
|---|---|---|
| Accuracy | ±5–8 s/day (near-COSC) | ±20–35 s/day |
| Movement architecture | 1:1 clone of gen calibers (e.g., 3235/4131/4130/15510) | Basic Miyota/Seagull/Chinese auto; little/no cosmetic bridging |
| Winding feel / rotor | Smooth, near-silent | Grittier; common rotor noise |
| Power reserve | 60–72 h | 24–40 h |
| Case/bracelet steel | 904L (or well-finished 316L) | 316L basic finishing |
| Crystal | Sapphire, decent AR | Mineral/acrylic more common |
| Water resistance | 50–100 m rated (always test) | Splash-resistant only |
| Weight vs. gen | Within ~±5–10 g | Noticeably off |
$349.00 – $879.00Price range: $349.00 through $879.00
$749.00 – $1,099.00Price range: $749.00 through $1,099.00
$699.00 – $739.00Price range: $699.00 through $739.00
Cant find what youre looking for?
We have 500+ models not shown on website. Message us!
48-72 Hours
Order preparation & inspection
1:1 Clone Quality
Swiss Premium Movement
QC Video
Before shipping for approval
9-12 Business Days
Express delivery (Tax Free)
USEFUL LINKS
Can't find what you're looking for?
We have 500+ models not shown on website. Message us!
48-72 Hours
Order preparation
Chronological inspection
1:1 Clone Quality
Swiss Premium Movement
QC Video
Before shipping for approval
9-12 Business Days
Express delivery (Tax Free)
